Home > Solar Generator Selections >

4000 Watt Split Phase 400ah Solar Generator & (2) 250 Watt Panels
Solar Generator For Well Pumps

Alternative Views:

Our Price: $3,750.00

Product Code: 40PS-42-250

Description Technical Specs
4 kW (12 kW Peak) 120/240Vac Split Phase Solar Generator

Can be connected to the electrical panel to provide power to your homes ac outlets...or it can used as a *stand alone system.

The split phase system will run both 120v & 240V Items Such As Well Pumps Up To 1.5 HP

Our Solar Powered Generator can run a 1 HP well pump for 1.5 hours per day of continuous use and a 1.5 HP Pump for 60 minutes per day.

Solar Generator Includes: (4) 100Ah Deep Cycle Batteries, 12K Watt Peak/4000 Watt Continuous Pure Sine Wave Inverter, (2) 250 Watt Solar Panels- excellent in low light conditions, *500 Amp ANL Fuse (safety feature), 40 amp MPPT charge controller with LCD Meter for monitoring battery status, and 30 feet of solar panel cables.

The inverter can utilize grid-power to charge the batteries and send the power out to your application using the built-in 40 amp battery charger. If the power does go down from the grid, this inverter is equipped with a seamless transition transfer switch, becoming a true UPS (Uninterruptible Power Supply) when you need it in emergency situations and natural disasters.

This inverter charger also comes with an Auto Generator Start mode that can tell a generator to start up and begin providing charge to the batteries (through a separate charger on a genset) or providing power to the home.

Our Solar Powered Generator Comes Assembled, Just Connect The Cables Together and You're Ready to Go!

There is an optional on board diagnostics LCD screen showing any abnormalities on all parts of the system, giving you ample time to fix the issue and exactly where to look.

*500 AMP ANL Fuse from Battery to Inverter. In the case of a short, the fuse will blow instead of ruining your equipment or starting a fire. Simply replace fuse if it blows
Dimensions: 36 x 22 x 22"

*To use as a stand alone system - Simply hard wire your ac outlets to the ac terminal block (As shown in the photo...not included.) The stand alone system can not use ac grid power to charge the battery bank. It must be connected the electrical panel to use the built in charger.

**Due to weight the batteries and solar panels will be shipped separately. Simply insert the batteries and connect the cables.

**Consult with an electrician for connecting the system to your breaker panel..
  • 12,000 Watt Peak/4000 Watt Continuous System
    Pure Sine Wave
    Split Phase
    60 Amp Built In Charger
    LCD Meter For Monitoring Battery Status
    1 USB Ports

Share your knowledge of this product. Be the first to write a review »